Why wait for your chiller to get damaged to the extent that you need a Louisville KY chiller repair? Everyone talks about going for Louisville KY chiller repair and the reason to do so. But what about the initial step that is a must to take? I want to talk about that step in particular.
Preventative maintenance, Preventative maintenance does just that;
It prevents harm and the need for Louisville KY chiller repair
Pulling the condenser water strainer
I will clarify how to pull the condenser water strainer for you to comprehend the way chiller maintenance performs.
The two pipes you will notice in your chiller are of the condenser water on one side of the system, the high side. The other one, with two more pipes, is known as the condenser side.
Turning it off
Because the strainers are for the condensers, you will open up the covers. You will then see a shell containing strainers. Now to pull them out, you will first turn off the machine.
Only the professional gets to do that
If you didn’t know already, I am not saying you have to do this to prevent Louisville KY chiller repair. NOPE. I am just clarifying what a professional does so you have an insight on why you need not wait for Louisville KY chiller repair and take preventative maintenance seriously.
I am addressing you as for hey, this is how they do it; the Louisville KY chiller repair. OK?!
Or maybe I should change the way I address you because I am concerned for you (anxiety triggered).
Also, turn off the power safety
So the professional then go towards the control panel, hits the off button, and turns off the power safety first.
What do they do to rig out the valve?
Now the professionals can begin by closing the valves (known not to hold, for example). They will have to figure something to rig out the valve so it can carry all right.
Then they set up a hose, open the valve, and if draining down, get a small trickle that says about as good as they are going to get it.
They will shut down the main valve if nothing else works
Now you gotta do what you got to do. So, if those valves don’t close, they can’t shut down that other chiller; the next option would have to be to shut down the chiller and get to the main valve and just shut it down.
Washing the strainers
Now they have all the strainers. They will now bring it into a room where they can wash it up. Water will do it for the most part, but to get a good cleaning, they’ll want to use the wire brush. That is quite the difference going to bring on that head pressure.
Putting the parts back and wrapping them again
So we have reached the step where they are just going to start to put the parts back and wrap them again because all the basic steps needed to 
make it nice and clean have ended.
Now, they will tighten down the nuts, and that’s pretty much it. The condenser water strainers are now clean, and yeah, here, they check for any leaks and double-check their work to ensure there are no leaks on the side, and that’s about it.
See how fast the process of preventative maintenance works if you want to prevent Louisville KY chiller repair. To prevent it indicates that you believe in the better safe than sorry meaning. Louisville KY Chiller repair is the key if the chiller is broken or damaged. But why always wait for that stage? You can do something before that to avert things from getting worse.
Address
7200 Distribution Dr, Louisville, KY 40258Phone: (502) 384-8500 Email: [email protected]
Opening Hours
| Monday | 9:00 a.m. – 5:00 p.m. |
| Tuesday | 9:00 a.m. – 5:00 p.m. |
| Wednesday | 9:00 a.m. – 5:00 p.m. |
| Thursday | 9:00 a.m. – 5:00 p.m. |
| Friday | 9:00 a.m. – 5:00 p.m. |
| Saturday | Closed |
| Sunday | Closed |
